27
WEEE Disassembly Instructions for the
TAE and TAE-DC Disk Array Enclosure
13.0 Disassembling the TAE and TAE-DC Disk Array
Enclosure
13.0.1 Removing and Disassembling a 2.5-inch Hard Disk Drive
1.
If installed, remove the front bezel. The bezel is required for EMI compliance when
the enclosure is powered up. Follow the instructions in
obtain the appropriate WEEE instructions for EMC bezels.
2.
Press on the disk's latch button to release the latch.
3.
Pull the latch and slowly pull the disk from its slot.
Figure 13. Removing a Hard Disk Drive from a TAE or TAE-DC
4.
To disassemble:
a.
Remove the five screws that attach the larger PCB to the assembly, and lift off.
b.
Remove the two screws that attach SAS PCB to the assembly, and lift off.
c.
Detach the plastic disk carrier, and lift off.
Figure 14. Disassembling the 2.5-inch hard disk drive
SAS
PCB
Plastic Disk Carrier
