35
WEEE Disassembly Instructions for the
TAE and TAE-DC Disk Array Enclosure
Figure 23. Removing the top PCB
13.0.3.3 Removing materials on the Power/Cooling Module Top PCB
1.
To remove the wiring:
a.
Disconnect the wiring from the PCB.
b.
Use wire cutters to cut the remaining end, and remove the cable.
2.
To remove the coils (circled):
a.
Flip over the top PCB and unsolder the coil’s leads with a soldering iron.
b.
Lift off each coil.
3.
To remove the large capacitor:
a.
Use a solder iron to unsolder the leads that attach the capacitor to the PCB.
b.
Remove the large capacitor.
The top PCB is ready to recycle after all components are removed.
