29
WEEE Disassembly Instructions for the
TAE and TAE-DC Disk Array Enclosure
13.0.2.1 Removing LCC Components
1.
Apply pressure to the connector fence and pull away from the LCC PCB.
2.
Remove the two screws that attach the plastic LCC guide (circled), and lift off of
the PCB.
3.
Drill the four rivets that attach the air dam to the LCC assembly, and remove the air
dam.
4.
Remove the four screws attach the SAS connector cage (highlighted), and remove.
Figure 16. Removing the connector fence, LCC guide, air dam, and SAS
connector
Connector
