25
Step 12 continued
Initialize the DL server
2. If the Disk Library Console already has an entry for the original DL server, delete
the server entry as follows:
a. Right-click the DL server and select Disconnect.
b. Right-click the DL server and select Delete.
3. Use one of the following methods to add the DL server to the Console:
Before you log in as dlroot, select Tools > Console Options, and clear the Remember
password for session
option.
•
Right-click EMC Disk Libraries and select Add.
The EMC Disk Library User Login window opens. Enter the following
information in the appropriate text boxes, and then click OK:
Disk Library Server IP Address
– xxx.xxx.xxx.xxx where x is the IP address of
the Disk Library server.
User Name
and Password – Log in as dlroot. Refer to the note on page 23 for
dlroot
login information.
OR
•
Right-click EMC Disk Libraries and select Discover.
Enter the IP address and the subnet mask of the required DL server. The Disk
Library Console locates your DL server, and adds an entry for the DL server
under EMC Disk Libraries.
When you connect for the first time to the DL server from the Disk Library
Console (right-click the DL server and select Connect), background verify
operations will begin on all the Disk Library LUNs.
For background verify to run, the storage system must be available on the
DL server network.
The background verify operations may take couple of hours to complete. Until the
background verify operations have completed, the DL should not be used for performance
testing.
