EMBRON HATTELAND HT B30G STC M Series, User Manual

Page: 19 / 114

19
IND100210-37
General Installation Recommendations
Installation
Mounting Bracket Kit (Wall / Desktop) HT B30G (Long Depth Models)
Mounting Bracket Kit (HT MBK STD-A1) is included with delivery. Note: Areas of interest are marked in this section
with symbols in RED color.
Note: In order to secure the unit properly, please use only the screws delivered with the unit. Choosing own screws
and longer than factory specified may cause permanent damage inside the unit and Warranty will be void !
Item Amount Art Description
2 P020079 L shape mounting bracket - HTB30 long
6 FDA04001-QB M4x8 Black Torx DIN7046 Stainless Steel with nylon thread lock
6 M5 Locking Nut DIN985 Locking Nut
6 M5,3 skive DIN 125 Washer
6 145 050x020 A4-80B M5x20 Unbrako DIN912 Black
▼ 1: Prepare the brackets, one on each side of the
unit as indicated. Make sure the bracket is rotated
correctly by aligning as red line show below.
▼ 2: Mount each bracket onto lower part of unit, using
3 pcs M4x8 Black Torx DIN7046 on each side of the unit. Use
Torque Force: 2.0 Nm
▼ 3: Place the complete unit onto your desired
location (i.e. desktop/wall) and mark the positions
you need to drill. The drilling hole should be M5.
The space under the location should allow for M5
locking nuts. Max thickness of mounting area/
plate is 8mm. If your mounting area/plate is thicker,
please assure you acquire longer screws specified
as “M5x20 or larger Unbrako DIN912 Black”. View
below is TOP VIEW.
▼ 4: Finalize the mounting of complete unit onto your location
using 6 pcs M5x20 Unbrako DIN912 Black (#1) with 6 pcs
M5,3 washer DIN125 (#2) and 6 pcs M5 Locking Nut DIN985
(#3) at the bottom as illustrated. Verifiy using hands to pull
and slide the unit to confirm it is secured tigthly onto location.
Use Torque Force: 3.75 Nm.
#1
#2
#3