EMBRON HATTELAND HT B30G STC M Series, User Manual

Page: 32 / 114

Physical Overview - HT B30xx STC-xxx-xxxxxx
32
IND100133-68
Module Expansion Matrix
Table below indicates how many duplicates of the same module can be installed at the same time. Due to limited
number of internal connectors, available space and technical limitations, some combinations (with duplicates) are
naturally not possible to achieve.
Factory Standards
The following illustration indicate mounting locations of the varirty of modules available and how they are numbered to
keep a persistent configuration at our factory. This is seen from user’s Point-of-View at rear of the unit.
Priority List amongst module installed in Expansion Area 1,2 and 3
1: COMx2 [A]
2: NMEA COM [B]
3: LAN [C]
4: CAN [D]
5: DIO [E]
6: AUDIO [F]
Note: “6: AUDIO [F]”, mounting location are added to next free available slot.
Priority numbering starts from Left going to Right as illustrated for models with 2 or 3 x module areas:
HT B30G (Long Depth Models):
1 2
3
HT B30K (Short Depth Models):
3 2
1