DATAPLOT GmbH
Gutenbergstraße 15
24558 Henstedt-Ulzburg
Germany
Telephone: +49 4193 995-0 Fax: +49 4193 995-220
www.dataplot.de
Page 20 / 28
5.
Remove the punch waste collecting container. Press the
lower die upwards with the finger and remove the die.
Continue as described from Step 2 in Section 3.3.
4.2
Plastic eyelets > plastic eyelets
1.
Remove the compressed air hose.
For the remainder of the installation procedure there
must be no pressure on the device!
2.
Actuate the manual operating lever to drive the finger
guard downwards.
Loosen the upper die with the open-end spanner
supplied and turn it out completely.
3.
Loosen the right screw for the lower die with a
screwdriver.