DATAPLOT GmbH
Gutenbergstraße 15
24558 Henstedt-Ulzburg
Germany
Telephone: +49 4193 995-0 Fax: +49 4193 995-220
www.dataplot.de
Page 17 / 28
3.9
Replacing the batteries of the LED pointer
1.
To replace the batteries in the battery compartment
remove the locking screw.
2.
Then insert a flat screwdriver into the mount and
carefully rotate.
3.
The cover should then lift on this side.
4.
Pull the cover in the direction of the arrow A and
carefully turn it upwards. Take care that the nib B does
not break off.
5.
Replace the two batteries with the battery type AA-Mignon.
Ensure the correct polarity.
Then proceed in the opposite sequence to close the battery compartment again.
B
A