DATAPLOT GmbH
Gutenbergstraße 15
24558 Henstedt-Ulzburg
Germany
Telephone: +49 4193 995-0 Fax: +49 4193 995-220
www.dataplot.de
Page 19 / 28
4
Changing the dies
4.1
Metal eyelets > metal eyelets
1.
Remove the compressed air hose.
For the remainder of the installation procedure there
must be no pressure on the device!
2.
Actuate the manual operating lever to drive the finger
guard downwards.
Loosen the upper die with the open-end spanner and
turn out as far as possible.
3.
Actuate the manual operating lever to drive the finger
guard upwards and turn out the die completely.
4.
Loosen the right screw for the lower die with a
screwdriver.