DATAPLOT GmbH
Gutenbergstraße 15
24558 Henstedt-Ulzburg
Germany
Telephone: +49 4193 995-0 Fax: +49 4193 995-220
www.dataplot.de
Page 15 / 28
4.
Cut away a piece (approx. 25mm long) of the
compressed air hose (not supplied) and attach it to the
angular piece supplied.
5.
Attach the other end of the 25mm long hose to the
connection on the device.
3.8
Installation of the optional LED pointer
1.
Prepare the LED pointer as shown in the photo at the
left. You may have to screw this onto the bracket.
2.
Remove the nut from the rear left screw.
3.
Attach the Laser pointer on the screw, but don't yet
tighten the nut.