EMAK Efco SA 9000, Operators Instruction Book

Page: 31 / 200

27
GB
MAINTENANCE CHART
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
or harsh cutting conditions are present the suggested intervals should
be shortened accordingly.
Bef
or
e Each U
se
A
ft
er Each
Refueling S
top
W
eehly
If Damaged or
Fault
y
A
s R
equir
ed
Complete Machine Inspect (Leaks, Cracks, and Wear)
X X
Controls (Ignition Switch, Choke
Lever, Throttle Trigger, Trigger
Interlock)
Check Operation
X X
Fuel Tank and Oil Tank Inspect (Leaks, Cracks, and Wear)
X X
Fuel Filter Inspect and Clean
X
Replace Filter Element
X
Every 6
Months
All Accessible Screws and Nuts
(not Adjusting Screws)
Inspect - Retighten
X
Air Filter Clean
X
Replace
X
Every 6
Months
Cylinder Fins and Starter System
Vents
Clean
X
Starter Rope Inspect (Damage, and Wear)
X
Replace
X
Carburetor Check Idle
X X
Spark Plug Check Electrode Gap
X
Replace
X
Every 6
Months
Vibration Mounts Inspect (Damage and Wear)
X
8. MAINTENANCE