EP-360 Micro panel printer
43/68
[Description] Enables or disables the panel buttons.
·
When the LSB of n is 0, the panel buttons are enabled.
·
When the LSB of n is 1, the panel buttons are disabled.
[Default] n = 0
GS ( F pL pH a m nL nH(for 701BM)
[Name] Set adjustment value(s)
[Format] ASCII GS ( F pL pH a m nL nH
Hex 1D 28 46 pL pH a m nL nH
Decimal 29 40 70 pL p a m nL nH
[Range] (pL + (pH
´
256)) = 4 (where pL = 4, pH = 0)
1
£
a
£
2
m = 0, 48 or 1, 49
0
£
( nL
+ nH
´
256
)
£
65535
(where 0
£
nL
£
255, 0
£
nH
£
255)
[Description] This command is effective only when the BM sensor is enabled.
Sets adjustment values(s) for the printer operations specified by a.
·
p
L
and p
H
specifies the number of the parameter such as a to (pL
+
(pH
´
256))bytes.
·
a specifies setting values for the positions to start printing and cutting
a
Function
1
Setting value for the positions to start the printing.
2
Setting value for the positions to start the cutting.
·
m specifies the direction of the adjustment.
m
Function
0,48
Specifies a forward paper feeding direction
1,49
Specifies a backward paper feeding direction.
·
nL
and nH
specifies the setting value to [(nL
+ nH
´
256)
´
0.125 mm].
·
The adjustment value for the print starting position (a = 1) is affected
with the following commands:
GS FF
·
The adjustment value for the paper cutting position (a = 2) is affected
with thefollowing commands:
GS V m n
[Default] All adjustment values are set to “0”.
(At the factory setting, the print starting position and the cutting
position are set to the head position and the cutter position
respectively when the BM sensor detects the BM.)
[Reference]
GS FF, GS V
①
GS V m
②
GS V m n(for cut)
[Name] Select cut mode and cut paper
[Format]
①
ASCII GS V m
UnRegister
ed