EP-360 Micro panel printer
41/68
[Description] Set Timeout for one byte, t = n
×
10 ms
；
so if There are 100 bytes
needed for a command, the printer will wait 1000
×
n ms, when n = 0
，
the printer will wait until all chars needed have received.
ESC C n
（
for BM
）
[Name] Set BM Max
[Format] ASCII ESC B n
Hex 1B 43 n
Decimal 27 67 n
[Description] With the current row spacing of unit, the line number to define the
scope of testing black mark, the default value is 4 inches
GS FF
（
for BM
）
[Name] Feed marked paper to print starting position
[Format] ASCII GS FF
Hex 1D 0C
Decimal 29 12
[Description] Feeds the marked paper to the print starting position.
Locate to the black mark.
[Notes]
·
This command sets the next print position to the beginning of the line.
·
Even if this command is executed at the print starting position of the
marked paper, the printer does not feed the marked paper to the next
print starting position.
[Reference]
GS ( F
ESC i (for cut)
[Name] cut paper
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] ESC m select a paper cutting mode and then full cut the paper.
ESC m (for cut)
[Name] partial cut paper
[Format] ASCII ESC m
Hex 1B 6d
Decimal 27 109
[Description] ESC m select a paper cutting mode and then partial cut the paper.
UnRegister
ed
