Emaar EP-360 User Manual Download Page 29

Page: 29 / 68

EP-360 Micro panel printer

29/68

Hex 1D 2F m

Decimal 29 47 m

[Range] 0

3, 48

[Description] Prints a downloaded bit image using the mode specified by m.

m selects a mode from the table below:

Mode

Vertical Dot Density

Horizontal Dot Density

0, 48

Normal

203.2 dpi

1, 49

Double-width

203.2 dpi

101.6 dpi

2, 50

Double-height 101.6 dpi

203.2 dpi

3, 51

Quadruple

101.6 dpi

[Notes]

This command is ignored if a downloaded bit image has not been

defined.

In standard mode, this command is effective only when there is no

data in the print buffer.

This command has no effect in the print modes (emphasized,

double-strike, underline, character size, or white/black reverse

printing), except for upsidedown printing mode.

If the downloaded bit-image to be printed exceeds the printable area,

the excess data is not printed.

[Reference]

GS B n

[Name] Turn white/black reverse printing mode

[Format] ASCII GS B n

Hex 1D 42 n

Decimal 29 66 n

[Range] 0

255

[Description] Turns on or off white/black reverse printing mode.

When the LSB of n is 0, white/black reverse mode is turned off.

When the LSB of n is 1, white/black reverse mode is turned on.

[Notes]

Only the lowest bit of n is valid.

This command is available for built-in characters and user-defined

characters.

When white/black reverse printing mode is on, it also applies to

character spacing set by

ESC SP

This command does not affect bit images, user-defined bit images,

bar codes,HRI characters, and spacing skipped by

ESC $

This command does not affect the space between lines.

White/black reverse mode has a higher priority than underline mode.

Even if underline mode is on, it is disabled (but not canceled) when

white/black reverse mode is selected.

[Default] n = 0

UnRegister

Summary of Contents for EP-360





































































Search results

Summary of Contents for EP-360

Reviews:

Related manuals for EP-360

Brands by name

Popular brands

Emaar EP-360, User Manual

Search results

Summary of Contents for EP-360

Reviews:

Related manuals for EP-360

Brands by name

Popular brands