55
13.2.
Declaration CE- Conformity
EM TEST AG
Sternenhofstrasse 15 CH 4153 REINACH
DECLARATION OF CONFORMITY
CW GENERATOR TYPE CWS
500A
Date of declaration:
November 1999
Standards
Emission EN 50081-2, edition 1993
Immunity EN 50082-2, edition 1994
Type of equipment
CW generator CWS
500A
Function
The test generator is designed according IEC
61000-4-6
standard, so called basic standard. It is generating cw signals
up to 250MHz to verify the conducted immunity of products .
The function of the generator therefore can be specified as
„generating and coupling interferences (high frequency) to the
lines and ports of equipments under test“.
This is to certify that the cw generator type CWS
500A is tested and measured according the
above mentioned standards.
The product is conform with the COUNCIL EMC directive 89/336/EEC of the European
Community.
For emission, the measuring conditions are specified by a report of a competent body.
The declaration of conformity for each single equipment is part of the operating manual.
Additionally special installation requirements, whenever necessary or useful, are listed as well in
the manual.
The declaration of conformity, together with the measuring/test reports, the measuring/test
conditions and the failure criterions are available at the EMC laboratory of EM TEST AG in
Switzerland as well as at the EMC laboratory of EM TEST GmbH in Germany.
European representative
Manufacturer
EM TEST GmbH
EM TEST AG
Lünenerstr. 211
Sternenhofstr. 15
D 59174 Kamen
CH 4153 Reinach
Tel: 00492307-260700
Tel: 004161-7179191
Fax: 00492307-17050
Fax: 004161-7179199
U. FLOR
H. KUNKEL
U. Flor
General manager
H. Kunkel
Design and Research
