62
14.4.
Test sequence as per EN 50082-2
Select the standard routine
Level X - Level Y
of the internal CWS 500
test routines. The generator will then automatically use the required test
sequence. The operator is free to program the individual levels according to
the upper limits in the standard routines.
14.5.
EM Clamp connection in the test setup
Take care by connecting the EM clamp in the test
setup. Check the output port
EUT
and
AE
.
The figure below shows the output signal when the
EM clamp is connected in wrong position.
Correct and wrong connetion of the EM clamp
