8
1.4.3.
Danger from the EUT
The device under test can
become dangerous due to the
influence of the applied test
pulses or test energy.
Therefore the operator shall take care to the following aspects:
-
As soon as the EUT ceases to operate as intended the test shall be
stopped immediately.
-
In the case of internal damage, high voltages might be exposed at any
point of the EUT.
-
Cables and connectors can be overloaded by high voltages or energies.
-
Due to internal damage of components,° explosion and fire may occur.
-
Unintended use of the EUT may cause hazardous situations in the
vicinity of the test setup.
Never touch the EUT or anything connected to the EUT
during a test
It is suggested that you read the operating manual carefully and
completely. It is absolutely necessary to observe and comply with the
security indications.
Safety functions:
- Please use the integrated “safety Circuit” function to protect the operator
from direct contact to high voltage.
