19
5.2.
Quick Start
Easy and very fast operation of all standard functions of the equipment.
Page 2
(Show parameters)
Page 3
(Change)
QUICK START
QUICK START
V =
10,0V
Mod =
1kHz
f
=
5.0MHz
Cal
=
F1
Voltage V
: 1.0 V - 30.0V
Frequency f
:0.009 MHz - 250.0MHz
V
Mod f
Cal
START CHANGE
CAL PRINT
10
ON 10.0
F1
F1
F2
F3
F4
F5
F6
F7
F1
F2
F3
F4
F5
F6
F7
Press
START
to begin testing.
Press
CHANGE
and the actual parameters can be changed.
Press
CAL
for calibration of the system (see paragraph 4.3 Calibration)
will print a hardcopy of the set-up via the serial interface RS232.
The test begins by pressing
START
. The blinking parameter can be
changed with the knob inc./dec. Use the cursor keys (
ÍÎ
) to select other
parameters. By pressing
STOP
the test will be stopped and on the last line
on the display it will be indicated that the test has been stopped.
Test break
START CHANGE CONT. CAL PRINT
F1
F2
F3
F4
F5
F6
F7
Pressing any of the function keys will display the functions
START
,
CHANGE
,
CONTINUE
,
CAL
or
. Selecting another function than
CONTINUE will stop the test routine definitely. Pressing
START
restarts the
test from the beginning.
While the test procedure is in progress, the setting of Cal cannot be
changed. PRINT prints the setting of the shown menu via the serial
interface RS 232 to a printer. If a test has been stopped by the user (STOP)
and continued (CONTINUE) a protocol of all breaks will be added (max. 10
user breaks).
