14
M
A
M
A
C
E
D
A
B
OPERATING INSTRUCTIONS
1.- DATE-TIME PROGRAMMING:
This operation is necessary as these data appear on every recor-
ded image.
A.- Press the
pushbutton. The monitor is switched on and the
figures for the day, month, year, hours and minutes will start
flashing. Each time the
key is pressed the figures for the
day and hours will increase of one unit.
B.- Press key
several times so that the day, month, year, hours
and minutes flash one after the other. Change the hours and
minutes as necessary using the
key. Once the sequence
has been started, it must be carried through to the end by pres-
sing key
several times until none of the date or time figures
are flashing.
If during these operations, the internal set time expires and the
monitor switches off, then press the key
to continue.
CONTROL DESCRIPTION
A) CONTRAST ADJUSTMENT KNOB
B) BRIGHTNESS CONTROL NOB
C) “MEMOVISION” function keyboard.
D) ON-OFF LED for automatic recording.
E) DISCHARGED BATTERY SIGNALLING LED
Example of recorded image displayed on screen.
2 - PROGRAMMING OF AUTOMATIC IMAGE RECORDING
To activate this function, press the
push-button; the red LED (H) and the monitor will come on simultaneously, the latter
indicating the hour, date and number of recorded images (if any have been recorded).
The monitor will now record the images of anyone calling from outside.
Once the maximum number of 32 recordings has been reached, the next (33th registration) will cover the first.
N.B.
By activating the automatic recording function, all the other keys are automatically inhibited.
3 - VIEWING OF RECORDED IMAGES
De-activate the automatic recording function if previously activated by pressing the
key; the RED LED (H) will go out.
Press the
push-button to view the first recorded image. In order to watch the entire sequence of images, press the same
button more than once. Once the sequence has been started, it is necessary to carry through to the end so as to reactivate the
functions of the other keys and for the memory programming.
N.B.
During the sequence of images, the symbol
will appear on the left side of the screen. Once the sequence has come to
an end, the
symbol will re-appear and the monitor will return to normal operation. The image-viewing function uses a
timer fitted inside the monitor, operating independently of the timer in the main system and allowing the recorded images
to be viewed even if in the meantime, the other monitors are using the video system for calls or other functions.
4 - VIDEO RECORDING RESET
Press the
button and keep it pressed for 5 seconds to can-
cel the contents on memory. The monitor must be operating nor-
mally when this operation is carried out; (with the
symbol
appearing on the screen).
5 - MANUAL VIDEO RECORDING
This function allows an image picked up by the camera to be
recorded when automatic function is not activated (red LED off).
When the call from outside is received, the image on the screen
is recorded immediately by pressing the
key.
N.B.
This function can also be used when the monitor is swit-
ched on from inside.
Example of date-hour programming
displayed on screen.
*
Symbol of direct image viewing -
Current date and hour
NUMBER OF
RECORDING IMAGE
HOURS
MINUTES
MONTH
DAY
YEAR
NUMBER OF
RECORDING IMAGE
HOURS
MINUTES
MONTH
DAY
YEAR
Recording image viewing
Recorded date and hour