Chapter 2 - Network Access
After hardware installation, user can view live video and configure parameters for the network camera, including IP address,
subnet mask and port number, etc. The following two methods can be used to access the camera:
1.
View live video and configure parameters over IE browser.
2.
View live video and configure parameters over client software.
2.1 Access over IE Browser
Before access to the camera over IE browser,
user should adjust the security level.
Open the IE browser, and set the security
level to Medium in Tools/InternetOptions/Se-
curity/Custom Level..., and enable or prompt
Activex Control and Plug-in directly as well.
2.1.1 Live View
Step 1:
Install Active-XControl
Type the IP address of the network camera
and press Enter, then the ActiveX mention
dialog will pop up.
Click Install to install the ActiveX control.
35
EN