Remote Upgrade:
Click Browse to select the local up-
date file and then click Updade to fi-
nish remote upgrade.
Restore Default:
Select Full Mode or Basic Mode to re-
store the default settings.
Note:
The Full Mode refers to restore all pa-
rameters to the factory default set-
tings.
The Basic Mode refers to restore the
parameters to factory default settings
except IP address, subnet mask, ga-
teway and port.
Reboot Device:
Click OK to reboot the network ca-
mera
Figure 2.1.32 Remote Upgrade
Figure 2.1.33 Restore Default
Figure 2.1.34 Reboot Device
51
EN