3. Set the port map in the virtual severs of Forwarding. By default, camera uses port 80, 8000, 554 and 8200. You can
change these ports value with IE or client software.
The following figure gives the illustration. One camera’s ports are 80, 8000, 554, 8200 and its IP address is 192.168.1.23. The
other camera’s ports are 81, 8001, 555, 8201 and IP is 192.168.1.24. Afterwards, enable all or TCP protocols. Enable the port
map after pressing the ‘Save’.
57
EN
As the settings mentioned above, map the router’s port 80 and 8000 to the network camera at 192.168.1.23; and port 81 and
8001 to the network camera at 192.168.1.24. In this way, user can access the 192.168.1.23 through accessing the router’s port
80 and 8000.
Note: The port of the network camera cannot conflict with other ports. For example, some router’s web management port is 80.
User can amend the router’s or the camera’s port to solve this problem.