59
GB
3.3 How to use
3.3.1 Start cooking
Touch the ON/OFF control for
three seconds. After power on,
the buzzer beeps once, all dis-
plays show “–” or “– –”, indica-
ting that the induction hob has
entered the standby mode.
Place a suitable pan on the coo-
king zone that you wish to use.
• Make sure the bottom of the
pan and the surface of the
cooking zone are clean and
dry.
Touch the heating zone selec-
tion control, and an indicator
next to the key will flash.
Select a heat setting by
touching the slider control.
• If you don’t choose a heat
setting within 1 minute, the
induction hob will automati-
cally switch off. You will need
to start again at step 1.
• You can adjust the heat
setting at any time during coo-
king.
Touch the heating zone selection
control that you wish to switch off.
Turn the cooking zone off by
touching the slider at “○”. Make
sure the display shows “0”.
Turn the whole induction hob off by
touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone
is hot to touch. It will disappear
when the surface has cooled down
to a safe temperature. This can
also be used as an energy-saving
function if you want to heat further
pans, by using the hotplate that is
still hot.
3.3.2 Finish cooking
If the display flashes
alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking
zone.
No heating takes place unless there is a suitable pan on the
cooking zone. The display will automatically turn off after 2
minutes if no suitable pan is placed on it.
.
Summary of Contents for CIH4660S
