elvita CIH4660S, User Manual

Page: 61 / 146

61
GB
Make sure that the induction
hob is turned on and that at
least one of the heating zones
will stay on until the timer runs
out. Otherwise, the hob will
automatically shut down to save
energy if no heating zone is
turned on.
Touch the timer control, the
number “10” will appear in the
timer display and the “0” will
flash.
Set the time by touching the slider control (e.g. 5).
Touch the timer control
again, the “1” will flash.
Set the time by touching the slider control (e.g. 9), now the
timer is set to 95 minutes.
When the time is set, it will begin to count down immediately.
The display will show the remaining time.
The buzzer will beep for 30
seconds and the timer
indicator will show “- -” when
the set time has expired.
Touch the heating zone selec-
tion control that you want to
set the timer for.
Touch the timer control, the
number “10” will appear in the
timer display and the “0” will
flash..
Set the time by touching the slider control (e.g. 5).
Touch the timer control
again, the “1” will flash.
Set the time by touching the slider control (e.g. 9), now the
timer is set to 95 minutes.
When the time is set, it will begin to
count down immediately. The dis-
play will show the remaining time.
NOTE: The red dot next to the
power level indicator will illuminate
indicating that zone is selected.
When the cooking timer expires,
the corresponding cooking zone
will be switched off automatically.
a) Using the timer as a minute minder
If you are not selecting any cooking zone
b) Setting the timer to turn one or more
cooking zones off
Set one zone
3.3.5 Timer control
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
• You can set it to turn one or more cooking zones off after the set time is up.
The maximum timer setting is 99 minutes.
Other cooking zones will keep operating if they were turned on previously.