Assembly
, Connection and Putting into Operation
55
Ill.: 15
1
.
The grey covering strips on both the right and left-hand side of
the cover are pressed outwards at the small groove ( 2 ). This
means that the screws on the cover become visible.
2
.
Close the housing using the four screws provided ( 1 ).
3
.
Press the grey covering strips back onto the cover until they
snap into place.
5.3.4 Verifying assembly and connection
WARNING!
Risk as a result of incorrect assembly and
connection
Incorrect assembly and connection of the DL230 may
lead to life-threatening situations.
Therefore:
– Assemble and connect the DL230 correctly.
– Sealing should solely be carried out by a calibration
officer.
– Follow the guidelines of DIN EN 60079-14,
DIN EN 60079-0, the ATEX Product Directive
94/9/EC as well as the ATEX Operating Directive
1999/92/EC EN.
1
2
2
Summary of Contents for DL230
