10
Setting the parameters
Room Temperature Controller KNX eTR 101-BA2
• Version: 20.04.2021 • Technical changes and errors excepted.
7.
Setting the parameters
7.1.
Behaviour on power failure/ restoration of
power
Behaviour following a failure of the bus power supply:
The device sends nothing.
65
Push button 1 Scene (recall and
save)
Output
R-CT
[17.1] DPT_
SceneNumber
[18.1] DPT_
SceneControl
1 Byte
66
Push button 1 NTC measured
value
Output
R-CT
[9.1] DPT_Val-
ue_Temp
2 Bytes
67
Push button 1 NTC external meas-
ured value
Input
-WC-
[9.1] DPT_Val-
ue_Temp
2 Bytes
68
Push button 1 NTC total measured
value
Output
R-CT
[9.1] DPT_Val-
ue_Temp
2 Bytes
69
Push button 1 NTC fault
Output
R-CT
[1.1] DPT_Switch 1 Bit
70
Push button 2 long-term
Output
R-CT
[1.8] DPT_Up-
Down
1 Bit
71
Push button 2 short-term
Output
R-CT
[1.10] DPT_Start
1 Bit
72
Push button 2 switching
Output
R-CT
[1.1] DPT_Switch 1 Bit
73
Push button 2 dimming
Input /
Output
RWCT [3.7] DPT_Con-
trol_Dimming
4 Bit
74
Push button 2 encoder 8 bit
Output
R-CT
[5.10] DPT_Val-
ue_1_Ucount
1 Byte
75
Push button 2 encoder 16 bit
Output
R-CT
[9.7] DPT_Val-
ue_Humidity
2 Bytes
76
Push button 2 Scene (recall and
save)
Output
R-CT
[17.1] DPT_
SceneNumber
[18.1] DPT_
SceneControl
1 Byte
77
Push button 2 NTC measured
value
Output
R-CT
[9.1] DPT_Val-
ue_Temp
2 Bytes
78
Push button 2 NTC external meas-
ured value
Input
-WC-
[9.1] DPT_Val-
ue_Temp
2 Bytes
79
Push button 2 NTC total measured
value
Output
R-CT
[9.1] DPT_Val-
ue_Temp
2 Bytes
80
Push button 2 NTC fault
Output
R-CT
[1.1] DPT_Switch 1 Bit
No
Text
Function
Flags
DPT type
Size
