![background image](http://html1.mh-extra.com/html/elsner-elektronik/71279/71279_installation-setting-operation_2396715006.webp)
4
Commissioning
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
•
5 display pages
, each of which have 8 different interfaces that can be
configured for operation or display: Switch, button, display, input, universal
interface
•
Screen saver
(clock, off) can be switched on or off
•
Automatic switch-off
can be turned on or off, integrated brightness sensor
for switch off in case of darkness
•
Key tone
can be switched on or off
•
8 AND and 8 OR logic gates
each with 4 inputs. 16 logic inputs in the form
of communication objects can be used as inputs for the logic gates. The output
from each gate can be configured optionally as 1-bit or 2 x 8-bit
•
8 multi-function modules
(computers) for changing the input data by
calculations, by querying a condition or by converting the data point type
•
8 alarm inputs
, alarm output as text, sound and/or flashing display lighting
3.
Commissioning
Configuration is made using the KNX software as of ETS 5. The
product file
can be
downloaded from the ETS online catalogue and the Elsner Elektronik website on
www.elsner-elektronik.de
in the “Service” menu. There you will also find the pro-
duct manual.
After the bus voltage has been applied, the unit will enter an initialisation phase lasting
approx. 4 seconds. During this period, no information can be received or transmitted
via the bus.
3.1. Addressing the equipment
The equipment is delivered with the physical address 15.15.255. This can be changed
via the ETS.
The programming mode can be activated under:
Settings > Service > KNX programming mode
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......