![background image](http://html1.mh-extra.com/html/elsner-elektronik/71279/71279_installation-setting-operation_2396715020.webp)
18
Setting the parameters and functions
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
The
start screen
sets the screen to which the display jumps after a reset. In addition,
you can set the options for what is to happen if no setting is entered on the display for
5 minutes.
A custom
screen saver
can be set independent of the automatic switch off. The screen
saver is activated after a waiting time.
The screen saver can be switched on and off using object no. 17 “Screen saver” via the
bus. The object no. 17 is input and output simultaneously, and thus may both receive
a command or transmit the status to the bus autonomously.
6.4.
Date and time
Stipulate whether the
Fabro KNX Touch Panel
date and time should be received as
a single or two separate objects. The date and time are requested from the bus via ob-
ject no. 10. As soon as the data is available on the bus, the query cycle is reset, regard-
less of whether the query was generated autonomously or arrived from another bus
member. The query cycle of several cycles is therefore usually set to the same value.
6.5.
Room brightness
The integrated brightness sensor on the
Fabro KNX
detects whether the room is
bright or dark, and can transmit this value to the bus with communication object 12.
Start page
• Screen 1
• ...
• Screen 5
If the display is not touched for more than 5
minutes, the display
• doesn't switch
• switches to the start screen
Use screen saver
Object no. 17 "screen saver"
No • Yes
waiting time
5 s • 10 s • ... • 2 h
Screen saver type
• Screen off
• Time
Date and time will be received via
• receive two separate objects
• receive one common object
Transmission cycle of the object "Date and
time query" (in s)
Object no. 10
[50...420; 120]
Object "Room brightness status" transmit-
ting
• not send
• on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......