42
Setting the parameters and functions
Fabro KNX Touch Panel
• Version: 13.07.2021 • Technical changes and errors excepted.
If the
output type is a 1-bit object
, set the output values for the various conditions.
If the
output type is two 8-bit objects
, set the type of object and the output values
for the various conditions.
Set the output send behaviour.
Output value
if logic = 1
1 • 0
Output value
if logic = 0
1 • 0
Output value
if block active
1 • 0
Output value if
monitoring time exceeded
1 • 0
Object type
• value (0…255)
• Percent (0…100%)
• Angle (0…360°)
• Scene call-up (0…127)
Output value object A
if logic = 1
0 … 255 / 100% / 360° / 127; 1
Output value object B
if logic = 1
0 … 255 / 100% / 360° / 127; 1
Output value object A
if logic = 0
0 … 255 / 100% / 360° / 127; 0
Output value object B
if logic = 0
0 … 255 / 100% / 360° / 127; 0
Output value object A
if block active
0 … 255 / 100% / 360° / 127; 0
Output value object B
if block active
0 … 255 / 100% / 360° / 127; 0
Output value object A if
monitoring time exceeded
0 … 255 / 100% / 360° / 127; 0
Output value object B if
monitoring time exceeded
0 … 255 / 100% / 360° / 127; 0
Send behaviour
• on change of logic
• on change of logic to 1
• on change of logic to 0
• on change of logic and periodically
• on change of logic to 1 and periodically
• on change of logic to 0 and periodically
• on change of logic+object receipt
• on change of logic+object receipt
and cyclically
Send cycle
(if sent periodically)
5 s • 10 s • ... • 2 h
Summary of Contents for 71279
Page 1: ...EN Fabro KNX Touch Panel Article number 71270 Installation setting operation ...
Page 2: ......
Page 47: ......