elsner elektronik 71279, Installation, Setting, Operation

Page: 43 / 48

41 Setting the parameters and functions
Fabro KNX Touch Panel • Version: 13.07.2021 • Technical changes and errors excepted.
6.11. Logic
The device has 16 logic inputs, eight AND and eight OR logic gates.
Activate the logic inputs and assign object values up to 1st communication.
Activate the required logic outputs
AND logic
OR logic
6.11.1. AND logic 1-8 and OR logic outputs 1-8
The same setting options are available for AND and OR logic.
Each logic output may transmit one 1-bit or two 8-bit objects. Determine what the out
put should send if logic = 1 and = 0.
value before first Communication 0 • 1
Output behaviour
when blocking • not send anything
• Send value
when released • as send behaviour [see above]
• send current value immediately
Use logic inputs Yes • No
Object value prior to 1st communication for
- Logic input 1 0 • 1
- Logic input ... 0 • 1
- Logic input 16 0 • 1
AND logic 1 not active • active
AND logic ... not active • active
AND logic 8 not active • active
OR logic 1 not active • active
OR logic ... not active • active
OR logic 8 not active • active
1. / 2. / 3. / 4. Input • Do not use
- Logic inputs 1...16
- Logic inputs 1...16 inverted
(see the chapter
Connection inputs for AND
or OR logic )
Output type • a 1-bit-object
• sends two 8-bit objects