Installation
|
|
ELSA LANCOM Wireless L-II
|
22
EN
���
The 'Power/Msg' LED on the access point lights up briefly when the
power is switched on. After the self-test, either an error is output by a
flashing light code or the device starts and the LED remains lit.
���
The 'WLAN link' LED on the access point indicates activity on the
wireless network.
���
The 'LAN-Rx' on the access point indicates data activity received on the
LAN.
���
The 'LAN-Tx' on the access point indicates data activity sent on the LAN.
���
The 'LAN Collision' LED on the access point indicates data collisions on
the LAN.
���
The LED 'LAN link' on the access point indicates data activity in the
Ethernet network.
���
The Reset button is recessed in the case and can only be reached with a
pointed object such as a paper clip. Press the Reset button until all of the
LEDs light up to reset the unit to its factory defaults.
2.4.2
The bottom of the unit
Now turn the whole thing upside down and take a look at the bottom. There
you'll find:
���
Connection for power supply unit
off
Device off
green
1 x short
Boot procedure (test and load) started
green
flashing
Display of a boot error (flashing light code)
green
Device ready for use
쐃
쐇
LAN
100235 Wireless L-11.book Seite 22 Montag, 30. Oktober 2000 5:43 17
