Installation
|
|
ELSA LANCOM Wireless L-II
|
28
EN
From this point on, the procedure is the same as for the
ELSA LANconfig
.
Telnet
Open a Telnet connection to the address '10.0.0.254' if you have not used IP
addresses in your network to date, or the address 'x.x.x.254', in which 'x.x.x'
stands for the address range previously used in the network.
Procedure example:
햲
Start the Telnet connection by clicking
Start
Run
and entering
Telnet 10.0.0.254
on the command line.
햳
Set the IP address on the LAN/WLAN:
cd /setup/TCP-IP
set intranet-addr. 10.0.0.1
set intranet-mask 255.255.255.0
When the Internet address is changed, the Telnet connection is interrupted.
햴
Set up DHCP
cd /setup/DHCP/
dir
set Condition on
Even if the entries at this point are not very clear without further explanation,
you can reach the same destination as with the setup with ELSA LANconfig!
100235 Wireless L-11.book Seite 28 Montag, 30. Oktober 2000 5:43 17
