|
Installation
23
|
ELSA LANCOM Wireless L-II
|
EN
���
10Base-T network connection
2.5
How to connect the device
햲
Connect your
ELSA LANCOM Wireless L-11
to the LAN. Plug the network
cable (supplied) into the 10Base-T terminal of the device and into a free
network connector on your local network (or into a free socket on a hub
in your LAN). Connect your
ELSA LANCOM Wireless L-11
to the LAN.
Plug the network cable (supplied) into the 10Base-T terminal of the
device and into a free network connector on your local network (or into a
free socket on a hub in your LAN). The cable for the LAN connector is
labeled with a colored bend-proof protector.
햳
Connect the AC adapter to the device and switch it on. After a short
device self-test the 'Power/Msg' LED will be permanently lit. The 'LAN
Link' LED indicates that your router is correctly connected to the LAN.
2.6
Software installation
The
ELSA LANconfig
configuration software for Windows operating systems
enables you to set up your router easily and conveniently for the desired
application. To use it, first install
ELSA LANtools
from the CD onto your
system. With other operating systems, you can use
ELSA WEBconfig
in an
HTML browser to carry out the configuration.
You will need a Windows PC on the LAN to run
ELSA LANconfig
. ELSA also
provides a Linux version of
ELSA LANconfig
which can be downloaded from
their website.
햲
Install the TCP/IP network protocol on the computer that will be used to
set up your device.
햳
Then install
ELSA LANconfig
. If the setup program does not start up
automatically after insertion of the
ELSA LANCOM
CD, start Windows
Explorer, click on 'autorun.exe' on the
ELSA LANCOM
CD and follow the
instructions in the install program.
2.7
Quickstart
The following steps should help you get your device running quickly and
easily. Choose from three different installation scenarios:
100235 Wireless L-11.book Seite 23 Montag, 30. Oktober 2000 5:43 17
