|
Installation
25
|
ELSA LANCOM Wireless L-II
|
EN
Wizards in
ELSA LANconfig
햲
Start the software
ELSA LANconfig
with
Start
Programs
ELSAlan
ELSA LANconfig
.
햳
Select your
ELSA LANCOM Wireless L-11
in the list of devices and call
up the wizards.
Wizards in
ELSA WEBconfig
햲
Launch your browser and enter the device's IP address, which you
configured in the basic settings, into the address field. If you did not
specify an IP address while carrying out the basic settings, the address is
'10.0.0.1'.
햳
The start page provides links to the wizards.
The wizards guide you through the individual configuration steps. Each step
is accompanied by an explanation of its values. The following provides a
detailed description of the basic settings for the
ELSA LANCOM Wireless L-
11
.
2.7.2
Basic settings
With the basic settings, you assign a name to the unit and define the IP
addresses for operation in the local network.
ELSA LANconfig
The first time
ELSA LANconfig
is run, the new device is detected on the TCP/
IP network and can immediately be configured. A wizard starts automatically
to help you with the basic configuration of the unit; it can also perform the
complete basic configuration for you.
The start page for automatic configuration does not appear in all described
cases. In some cases you are asked to enter an IP address in the next step
(
햴
).
햲
Start the new software with
Start
Programs
ELSAlan
ELSA
LANconfig
.
100235 Wireless L-11.book Seite 25 Montag, 30. Oktober 2000 5:43 17
