Eloma EB 30, Translation Of The Original Operating Instructions, Page: 19 / 76

Readiness for operation
19
3.4 OPTIONS AND ACCESSORIES
3.4.1 DEVICE WITH WATER TANK (OPTIONAL)
 INFORMATION:
 On devices with a water tank the device can be filled with water manually.
 The water tank has a capacity of approximately 2 l.

The water tank is situated in the top part of the device, next to the
controller.
 When the content drops below 250 ml, a topping up reminder appears on
the screen.

Refill messages respectively appear on the screen at 30%, 15%, 10%, and 5%
of the tank capacity.
Fig. 4: Removing the water tank
Sequence for filling the water tank
1.
Remove the water tank from the housing.
2. Firmly press on the flap in the operating panel to open it.
3. Briefly push the water tank upwards by the handle and then pull it out
straight.
4. Open the cover and fill the water tank with water up to the mark.
 INFORMATION:

Set the tank down on a horizontal surface.
5. After filling, close the water tank so that the water tank cover engages in
place.
6. Push the water tank into the designated space as far as it will go.
7. Close the flap in the operating panel. The Backmaster is ready for operation.
Water tank
Press here to open