Controller Data Sheets
35
AccuTouch PC-Bus Controller (E271-2201)
Verify the controller’s jumper settings are as follows:
(From Top)
Default from jumpers
J7 - Y
Reserved
J6 - N
Touchscreen Type
AccuTouch
J5 - Y
Stream Mode
J4 - N
No Interrupt (software selected)
J3 - N
J2 - N
Base I/O Port (in hex)
280 (recommended)
J1 - N
J0 - N
240
J1 - N
J0 - Y
180
J1 - Y
J0 - N
100
J1 - Y
J0 - Y
2A0
Cross-connect (connect jumper vertically so
the left pins of J0 and J1 are jumpered)
J10 and J11 elsewhere on the controller should not be jumpered.
Jumpers cross-connected vertically on the right side of the jumper block have no
effect and are available as extra jumpers.