Step 3 - Modify CONFIG.SYS
9
Create a subdirectory on your hard disk and copy the files into it. For example,
CD \
MD ELO
COPY A:*.* ELO
International Versions
International versions of the Touchscreen Control Panel are included in
subdirectories on the MonitorMouse for OS/2 disk. Replace ELOCAL2.DLL and
ELOCAL2.HLP on your hard disk with the versions from the appropriate
subdirectory.
S
TEP
3 - M
ODIFY
CONFIG.SYS
MonitorMouse for OS/2 is installed by commands in CONFIG.SYS. Use your
system editor to make these changes. In general, the changes are as follows:
•
Comment-out the existing DEVICE command(s) for your mouse.
•
Add a DEVICE command for the appropriate MonitorMouse for OS/2
touchscreen driver immediately after the commented-out DEVICE
commands(s).
•
Add a new DEVICE command for MOUSE.SYS.
The order of the DEVICE commands is important. See the sample CONFIG.SYS
in Appendix C, page 43.
Other changes may be required depending on your hardware configuration and
version of OS/2.
Detailed Instructions for System Configurations
Refer to the page number given below for detailed instructions on your specific
configuration.
Serial Touchscreen Controller
on PC-Bus System
10
Serial Touchscreen Controller
on PS/2 System
11
PC-Bus
Touchscreen Controller
12
Micro Channel
Touchscreen Controller
13