Elnec DATAMAN-40PRO, User Manual

Page: 49 / 162

DATAMAN-40PRO
C1
R1
H/L/read driver
in programmer
pin of ISP
connector
PU/PD driver
in programmer
R2
C1=1nF, R1=1k3, R2=22k
Selftest
If you feel that your programmer does not react according to your expectation, please run the
programmer selftest using Diagnostic POD, enclosed with the standard delivery package.
•
Insert 40 pins diagnostic POD - type I into ZIF socket of the programmer. 40 pins
diagnostic POD - type I must be inserted as 40 pins device.
•
Run selftest of programmer in PG4UW (Programmer / Selftest plus).
Technical specification
HARDWARE
Programmer
•
two D/A converters for VCCP and VPP, controllable rise and fall time
•
VCCP range 2..7V/350mA
•
VPP range 2..25V/200mA
•
USB 2.0/1.1 compatible interface
•
selftest capability
ZIF socket, pindriver
•
40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
•
pindriver: 40 TTL pindrivers, universal GND/VCC/VPP pindriver
•
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins, level H
selectable from 1.8 V up to 5V
•
continuity test: each pin is tested before every programming operation
49