Elnec DATAMAN-40PRO, User Manual

Page: 45 / 162

DATAMAN-40PRO
Introduction
DATAMAN-40PRO is next member of new generation of Windows based DATAMAN
universal programmers. Programmer is built to meet the demands of the development labs
and field engineers to universal, but portable programmer.
DATAMAN-40PRO is a small, fast and powerful programmer of all kinds of programmable
devices. Using build-in in-circuit serial programming ( ISP ) connector the programmer is able
to program ISP capable chips in-circuit. DATAMAN-40PRO isn't only a programmer, but also
a static RAM tester.
DATAMAN-40PRO provides very fast programming due to high-speed FPGA driven
hardware and USB 2.0 full speed port.
DATAMAN-40PRO interfaces with the IBM PC Pentium compatible or higher, portable or
desktop personal computers through USB port , what is important for new, LPT-port-less
computers (notebooks for example).
DATAMAN-40PRO has 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read
capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed
circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin
drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced
low-voltage devices.
The programmer performs
device insertion test (wrong device position in socket) and
contact check (poor contact pin-to-socket) before it programs each device. These
capabilities, supported by signature-byte check help prevent chip damage due to operator
error.
DATAMAN-40PRO programmer performs programming verification at the marginal level of
supply voltage, which, obviously, improves programming yield, and guarantees long data
retention.
DATAMAN-40PRO programmer is driven by an easy-to-use control program with pull-down
menu, hot keys and on-line help. Selecting of device is performed by its class, by
manufacturer or simply by typing a fragment of vendor name and/or part number.
Standard device-related commands (read, blank check, program, verify, erase) are boosted
by some test functions (insertion test, signature-byte check), and some special functions
(autoincrement).
All known data formats are supported. Automatic file format detection and conversion during
load of file.
The rich-featured
autoincrement function enables to assign individual serial numbers to
each programmed device - or simply increments a serial number, or the function enables to
read serial numbers or any programmed device identification signatures from a file.
45