Elnec DATAMAN-40PRO, User Manual

Page: 134 / 162

•
set device parameters, settings, and load required device data to buffer by Load file
command in PG4UW
•
optionally make test of device operation by running the device operation on device
•
if everything is OK, the project file can be created by Save project command
•
Select Master multichip device, the Multi-project has to be used for. After selection of
multichip device, Multi-project Wizard is automatically opened.
•
In Multi-project Wizard add required projects by Add project button. Each project
represents one sub-device of multichip device.
•
After completing of sub-project selection, use button Build Multi-project to create final
Multi-project file. Program will prompt for name of new Multi-project file. Final Multi-project
file will contain all sub-projects listed in Table 1: Sub-projects.
Notes:
There is possible to create Multi-project from any classic project files. So association with
Master device is not mandatory. It is only on user's consideration how to combine correct
sub-devices (sub-projects) into one Multi-project. This feature can be especially useful when
using ISP programming of devices in JTAG chain with different projects defined.
Multi-project Wizard can be opened by one of following actions:
•
selecting of Master multichip device from Select Device dialog in PG4UW
•
loading of created Multi-project file
•
opening dialog Multi-project Wizard directly from PG4UW menu Options | Multi-project
Wizard
*1 Convention for Master-device and Sub-device part names in PG4UW device list:
Master-device: Multichip_original_part_name [package_type]
Sub-devices: Multichip_original_part_name [package_type] (part1)
Multichip_original_part_name [package_type] (part2)
...
Multichip_original_part_name [package_type] (part n)
Example:
Master-device: TV0057A002CAGD
[FBGA107]
Sub-devices #1 TV0057A002CAGD [FBGA107] (NAND)
#2 TV0057A002CAGD [FBGA107] (NOR)
Using of Multi-project for running of device operation
Typical usage of existing Multi-project file has following order.
For single programming in PG4UW:
•
Load created Multi-project by File / Load project menu command in PG4UW main
window or Load multi-prj button in Multi-project Wizard.
After successful loading of Multi-project, Multi-project Wizard is opened automatically.
•
In Wizard run wished device operation using one of available device operation buttons
(Blank, Verify, Program, Erase), mostly Program device operation is used. Selected
device operation is executed as sequence of sub-project loading and consequent sub-
device programming for each sub-device defined in Multi-project. And this is main
purpose of Multi-project - to automate running sequence of device operations for each
chip of multichip device. The side effect of this concept is, that device progress indicators
134