Elnec DATAMAN-40PRO, User Manual

Page: 11 / 162

Quick Start
If two programmers are to be connected to a single PC, then we strongly recommend to
connect each programmer to separate USB 2.0 High speed controller (USB EHCI). For more
information see "Hardware setup" chapter.
Free disk space requirement depends also on used IC device size and number of attached
programming sites. For large devices the required free space on disk will be approximately
1000MB + 2x Device size x number of programming sites attached to this PC.
Very easy indication, if your PC in hardware/software configuration is good enough for the
current software version and current situation with PG4UW/PG4UWMC, is to run Windows
task manager (Ctrl+Alt+Del) and see the performance folder. It have to be max. 80% of CPU
usage at full run of programming system.
Note: For convenience, we suggest that you use a supplementary multi I/O card to provide
an additional printer port (LPT2 for example), in order to avoid sharing the same LPT port
between printer and programmer.
Free additional services:
•
free technical support (phone/fax/e-mail).
•
free lifetime software update via Web site.
Free software updates are available from our
Internet address www.dataman.com .
11