28
Drawing Up the Bobbin Thread
z
x
cv
e
w
e
r
z
x
c
e
w
q
w
q
z
Raise the Presser foot lever.
Turn the power switch on.
Hold the needle thread with your finger.
x
Press the Up/Down needle key
e
twice to pick up
the bobbin thread.
Draw up the needle thread
q
to bring up a loop of
the bobbin thread
w
.
c
Slide 10 cm (4˝) of both threads to the back under
the presser foot.
Built-in Needle Threader
z
Press the Up/Down Needle key
q
until the needle
is in an up position. Turn OFF the power switch.
Lower the presser foot.
Lower the needle threader lever
w
as far as it will
go. Hook
e
is automatically inserted into the
needle eye.
x
Draw the thread from the guide
r
to the guide
t
.
The thread is caught under the hook
e
.
c
Slowly release the lever while holding the thread
end and let the needle threader return to its
original position. A loop of thread is pull through the
needle eye.
v
Pull the thread loop off the guide to the back and
manually bring the thread through the needle eye.
NOTE:
• The needle threader can be used with #11 to #16
size needles. Thread weight may vary from 30 to
90.
• Needle threader cannot be used with a twin needle
or wing needle.
If the needle threader does not catch a thread loop,
check the needle and positioning.
t
q
Summary of Contents for 5200
Page 1: ......