15
◆
POWER ON/OFF
Press the Power button to turn on the power. (Power LED: lights up blue)
Press the Power button again to turn off the power. (Power LED: lights up red)
The image signal from the device connected via HDMI or USB Type-C is output from the HDMI Output
port. If a device is connected to the HS-2 with a cable and there is no image signal input from the device,
the Connection screen appears on the screen.
As shown in the picture, it is possible to do mirroring by connecting to the “Device Name” displayed on the
screen via Wi-Fi.
※
Depending on your environment, it may take some time to startup or display Device Name and SSID.
◆
SETTING THE DESTINATION
The Destination selection screen is displayed when the HS-2 is started for the first time or after
initialization. Select the country you want to use the HS-2 and press the Enter button [ ] on the
remote control to set the destination.
Connection destination