Mitterweg 25 – Via di Mezzo ai Piani 25
I
-39100 Bozen
-
Bolzano
Tel.:0471 977236
-
Fax:976525
e-mail:
http://www.elmed.it
8
1.2.2
Switching on the left/right-hand nozzle
rings
By pressing in the left or right-hand area of the
content display (highlighted in blue in Fig. 2), or by
using the left/right button (on top of the device), the
right or left nozzle rings can be turned on or off
individually. If one side is turned on, this will be
shown with a solid dot (circled in red in Fig. 2).
Note: The nozzle rings can only be switch on/off
when the main switch (→ chapter 1.3) has been
deactivated.
Nozzle ring on
Nozzle ring off
Notes: In the case of prolonged inactivity (about 5 min. without speed, pressure and in
absence of any keys being operated on the display), all valves are switched off
automatically for safety reasons and in order to reduce power consumption (nozzle rings
and suction). Even the display illumination is turned off. The same applies to the IDS03
volume sensor (if in place).
1.2.3
Fan cover
The two switch symbols for switching the left and right-hand fan covers on and off
can be operated either manually or automatically (see also chapter 2 "Cover").
In the case of sprayers without the relevant covers, these buttons are not available.
1.2.4
Sectors in multi-row sprayers
With multi-row sprayers the individual sectors are switched on and off with the nozzle ring
buttons described above, and not the nozzle rings. In the case of tunnel sprayers, the left
and right sides of a sector are always turned on at the same time, even if you just click on
one of the two sides.
1.3
Main switch
All nozzle rings are switched off or on again with the main switch (press on the
corresponding symbol or with the middle button on the top of the device).
Main switch on,
Main switch off
(=nozzle rings off)
(=nozzle rings on)
Fig. 2: Switching on left/right-hand nozzle
rings