Mitterweg 25 – Via di Mezzo ai Piani 25
I
-39100 Bozen
-
Bolzano
Tel.:0471 977236
-
Fax:976525
e-mail:
http://www.elmed.it
18
Water application deviation in percent
Depending on the existing plant system it may be necessarily to adapt the water
application rate. Enter the deviation in percentage points (-50 to +50%).
Plant systems with recommended deviation:
0% = single row
30% = bed planting
10% = double row
-10% = palms
20% = triple row
Speed
This is where the recommended speed that should be adhered to when driving with the
sprayer is displayed in km/h. (Small deviations in speed are taken into consideration as
the vehicle is moving and compensated for automatically).
Note: When the speed limiter function is active, then the value entered here (minus 0.2
km/h) is used as the threshold value. (For more information see Setup → chapter 6.8
“Minimum speed”)
Nozzle-type
The type of nozzle used (ATR or ISO) can be selected in the corresponding selection
area (Fig. 15). The nozzle colour can be chosen in the neighbouring area. The
recommended nozzle colour indicated beneath is determined using the spray
programme settings.
3.2.3
Page 3: (Selecting the chemical/product)
The chemicals/products used for the spraying operation
are entered on the last page.
Up to 5 chemicals/products may be selected. For each
chemical/product
used
the
required
(=
max.
recommended) quantity per hectolitre is displayed in
grams alongside (may be amended by pressing on the
corresponding number). The final number is the
absolute quantity necessary for the field to be worked.
3.2.4
Spray Programme Management
To delete, copy or create programmes press
the
button
for
managing
the
spray
programmes the “spray programmes” menu
(in the middle of the button area, Fig. 13 & 15 or 17 &
19). A new window opens (Fig. 20) with the following
four buttons:
Fig. 19: Spray programme – page 3
Fig. 20: Spray programme management