Mitterweg 25 – Via di Mezzo ai Piani 25
I
-39100 Bozen
-
Bolzano
Tel.:0471 977236
-
Fax:976525
e-mail:
http://www.elmed.it
29
7.4
Number of nozzle rings
Enter the number of nozzle rings to be switched on here. To do this it is only
necessary to press within the framed text. 2, 4, 6 or 8 nozzle rings can be selected.
The number of buttons in the main window with which the nozzle rings can be switched
on/off reduces/increases with this setting.
Note: If the fan cover is switched on with the device, then only a maximum of 6 nozzle
rings may be selected. (The relay outputs for nozzle rings 7 and 8 are then already
allocated to the left and right fan cover.)
7.5
Current display
With the activation of the current display (the symbol is shown inversely) the current
of the servomotor (in ampere) is displayed in the main window, instead of the content
display. This function is only provided for servicing purposes.
8
Content
Different level curves can be assigned or new
ones created in the “content” menu.
The level curve is necessary for calculating the tank
content. Since every tank differs in shape and size,
every tank will also have its own individual level
curve. This curve can be assigned in the “assign”
menu (→ chapter 8.2).
In the case of a new tank or an unknown tank, a level
curve can be created in the “Calibration” menu (→
chapter 9).
8.1
Directory
The available level curves are saved in the form of a table. All tables are listed in the menu
directory.
The name of every single table can be edited with this button.
Single tables can be deleted with this button.
8.2
Assignment
A directory opens in which the appropriate level curve for this sprayer or tank can be
assigned. Highlight the table you wish to use and confirm with the OK button.
Fig. 38: Service menu content