Mitterweg 25 – Via di Mezzo ai Piani 25
I
-39100 Bozen
-
Bolzano
Tel.:0471 977236
-
Fax:976525
e-mail:
http://www.elmed.it
16
3.2.2
Page 2: (Programme settings)
Depending on the device settings, for the second page there are two different input options
(standard and SBR). Which of the two options are applicable can be ascertained from the
parameters to be entered:
Standard option (
chapter 3.2.2.1)
with the following inputs: area, application quantity and speed. (see Fig. 15)
SBR South Tyrol option (
chapter 3.2.2.2)
with the following inputs: area, concentration, water required and speed. (see Fig. 17)
3.2.2.1
Standard option
The window with the “standard option” programme
settings only appears if the check-box for
“Calculation by SBR South Tyrol option” is disabled
in the Service menu (
chapter 7.1). Otherwise
please follow the instructions in the next chapter (
3.2.2.2).
The following parameter can be set:
Number of nozzles
The number of nozzles in each ring is shown
individually in the top part of the screen (in
clockwise order, starting with the bottom left
ring).
To adapt the number of nozzles press this top
area and a window will open (Fig. 16), where
the position of the nozzle rings with the
number of nozzles are shown in graphic form
(bottom left to bottom right). Press one of the
nozzle rings (=selection fields) to define a new
number of nozzles.
In the case of multi-row sprayers, just the number
of nozzles per sector needs to be indicated.
Area
The area to be worked is taken from the data for the assigned field. It can be adjusted
individually here.
Application rate
The amount in litres per hectare to be applied.
Fig. 16: Selecting the number of nozzles
Fig. 15: Spray programmes - page 2