ellman Surgitron 4.0 Dual RF/120 IEC, Instruction Manual

Page: 4 / 28

3
1.2 PACKING LIST Wolf Part Number
1.2.1 Wolf /
ellman
Surgitron 4.0 Dual RF/120 IEC 2343.001
1.2.2 IEC Power cord 2343.903
1.2.3 Dual Footswitch & Cable 2343.901
1.2.4 IEC Foot Controlled Handpiece, 1/16" shaft 8792.698
1.2.5 Bipolar Cable 2343.837
1.2.6 Disposable Neutral Plate 2343.011
1.2.7 Instruction Manual -
1.2.8 Three-Button Fingerswitch Handpiece 8792.696
OPTIONAL PARTS
1.2.9 Fingerswitch Handpiece 3/32" Shaft
1.2.10 Electrode Set 1/16" Shaft
1.2.11 Bipolar Forceps
1.2.12 Disposable Three-Button Fingerswitch Handpieces
1.2.13 Neutral Plate
1.2.14 Surgi-Cart III
1.2.15 Vapor-Vac II
II. TECHNICAL INFORMATION
2.0 DISTRIBUTOR’S INFORMATION MANUFACTURER’S INFORMATION
Richard Wolf Medical Instruments Corporation
ellman
international inc.
353 Corporate Woods Parkway 1135 Railroad Avenue
Vernon Hills, Illinois 60061-3110 Hewlett, New York 11557
(800) 323-WOLF (9653) (516) 569-1482
sales&marketing@richardwolfusa.com
Manufacturer will make available on request circuit diagrams, component parts list, description, calibration
instructions or other information necessary to assist the user's appropriately qualified technical personnel.
Technical specifications subject to change without notice.
2.1 GENERAL DESCRIPTION
The Wolf /
ellman
Surgitron 4.0 Dual RF/120 IEC enhanced capability Radiosurgical Generator
described herein is a compact source of high frequency low temperature RF energy to be employed for a
variety of radiosurgery procedures. This action is achieved by front panel selection of waveforms and
power levels. All selections are effected through push buttons and lamps which give the operator feedback
of status. Power level for each mode is indicated by front panel digital displays which also show the status
of self-test and monitoring. This display is interlocked with the controls to prevent operation when FAIL is
displayed. The final output power control is made through foot and/or hand switches. An internal memory
provides a special feature for the storage of all the front settings, mode and power output levels. Both
Monopolar and Bipolar electrodes are available. This unit is designed to comply with international safety
standards.
2.2 APPLICABLE SPECIFICATIONS
The following specifications are applicable to the extent called out herein.
IEC 60601-1 Medical Electrical Equipment - Part 1 General Requirements for Safety
IEC 60601-2-2 Medical Electrical Equipment - Part 2 Particular Requirements for Safety
UL 2601 Medical Electrical Equipment Safety (USA Version)
CSA 22.2601 Medical Equipment Safety (Canadian Version)