Elliott Traffic Safety Service L60, Operator'S Manual

Page: 50 / 212

Outrigger Controls Hi Reach MHMH EEC-0086 V1.1
Outrigger Controls-HiReach
MHMH
A. Left/Right Rear Outrigger Beam Lever- Activate lever
“
UP
” or ”
DOWN
” to
extend/retract the left/right rear outrigger beam
B. Left/Right Front Outrigger Beam Lever- Activate lever
“
UP
” or ”
DOWN
” to
retract/extend the left/right front outrigger beam
C. Left/Right Rear Outrigger Jack Lever-
Activate lever “
UP
” or ”
DOWN
” to
lower/raise the left/right rear outrigger jack
D. Left/Right Front Outrigger Jack Lever-
Activate lever “
UP
” or ”
DOWN
” to
lower/raise the left/right front outrigger jack
E. Engine Throttle Switch
F. Hydraulic Selector Valve- pull OUT to divert hydraulic control to outriggers.
Push IN to divert hydraulic control to aerial device functions.
G. Hyd. System Pressure Gauge
This is located inside control valve enclosure. Indicates Maximum pressure (0-3000
PSI) in the outrigger circuits.
NOTE:
Left and right are based on operator’s left and right as they stand at the
outrigger control box facing the front of the truck.
G
A B C D D C B A
F E