2. Parts Inventory.
a.
hanging bracket. 1 piece
b.
remote control transmitter. 1 piece
c.
remote control receiver. 1 piece
d.
wall control and plate. 2 separate pieces
e.
yoke cover. 1 piece
f.
safety cable with vice (already attached to
motor). 1 piece
g.
canopy. 1 piece
h.
motor housing. 1 piece
i.
6in. downrod and hanging ball. 1 piece
j.
blade arm. 5 pieces
k.
switch housing plate. 1 piece
l.
blade. 5 pieces
m.
glass shade. 1 piece
n.
light kit fitter. 1 piece
o.
finial plate (pre-attached to light kit fitter).
1 piece
p.
finial (pre-attached to light kit fitter). 1 piece
q.
threaded washer (pre-attached to light kit
fitter). 1 piece
r.
hardware packs
page 2
d
m
o
n
h
l
e
i
a
b
c
1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
g
j
p
q
r
k
f
IMPORTANT REMINDER
: You must
use the parts provided with this fan for
proper installation and safety.
required bulbs:
lighted housing
--4 x 15 watt max. candelabra base bulbs
(pre-installed in motor housing)
light kit
--3 x 40 watt max. candelabra base bulbs
(included)
